BIS notifies amendments to multiple Indian Standards

Jan 16, 2020 | by Avantis RegTech Legal Research Team


Commercial Compliance

The Bureau of Indian Standards (BIS) on December 30, 2019, notifies that the following Indian Standards established on December 04, 2019 shall remain in force concurrently till they are notifies as cancelled:

1. IS 642 : 2019 Varnish Medium for Aluminium Paint – Specification (Second Revision)

2. IS 900 : 2019 Code of Practice for Storage, Installation and Maintenance of Induction Motors (Third Revision)

3. IS 1231 : 2019 Dimensions and Output Series of Foot Mounted Induction Motors – Frame Numbers 56 to 315 L (Fourth Revision)

4. IS 1410 : 2019 Textiles – Coir Ropes – Specification (Fourth Revision)

5. IS 1448 (Part : 9) : 2019/ISO 5165 : 2017 Methods of Test for Petroleum and its Products (P : 9) Determination of the Ignition Quality of Diesel Fuels – Cetane Engine Method (Second Revision)

6. IS 1448 (Part : 69) : 2019/ISO 2592 : 2017 Methods of Test for Petroleum and its Products (P : 69) Determination of Flash and Fire Points – Cleveland Open Cup Method (Second Revision)

7. IS 1462 : 2019 Talc for Cosmetic Industry ─ Specification (Fourth revision)

8. IS 6611 : 2019 Symbols for Rubbers and Latices (Second Revision)

9. IS 7424 : 2019 Photoelectric Reflectance Method for Measurement of Whiteness of Plantation White Sugar in Solid State (Second Revision)

10. IS 11877 : 2019 Automotive Vehicles ─ Maximum Speed of Automotive Vehicles ─ Method of Evaluation (First revision)

11. IS 12458 : 2019 Fire Resistance of Through Penetration Firestops ─ Method of Test (First Revision)

12. IS 13360 (Part 2/Sec 3) : 2019/ISO 294-1 : 2017 Plastics – Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection Moulding of Test Specimens of Thermoplastic Materials – General Principles and Moulding of Multipurpose and Bar Test Specimens (First Revision)

13. IS 13360 (Part 6/Sec 6) : 2019/ISO 4589-1 : 2017 Plastics ─ Methods of Testing Part 6 Thermal Properties Section 6 Flammability by Oxygen Index ─ General Requirements (Second Revision)

14. IS 13360 (Part 6/Sec 19) : 2019/ISO 4589-2 : 2017 Plastics ─ Methods of Testing Part 6 Thermal Properties Section 19 Flammability by Oxygen Index ─ Ambient Temperature Test (First Revision)

15. IS 13360 (Part 6/Sec 20) : 2019/ISO 4589-3 : 2017 Plastics ─ Methods of Testing Part 6 Thermal Properties Section 20 Flammability by Oxygen Index ─ Elevated Temperature Test (First Revision)

16. IS 13360 (Part 8/Sec 5) : 2019/ISO 177 : 2016 Plastics ─ Methods of Testing Part 8 Permanence/Chemical Properties Section 5 Determination of Migration of Plasticizers (First Revision)

17. IS/ISO 15223-1 : 2016 Medical Devices – Symbols to be Used with Medical Device Labels, Labelling and Information to be Supplied Part 1 General Requirements (Second Revision)

18. IS 15305 (Part 1) : 2019/ISO 12213-1 : 2006 Natural Gas – Calculation of Compression Factor Part 1 Introduction and Guidelines (First Revision)

19. IS 15305 (Part 2) : 2019/ISO 12213-2 : 2006 Natural Gas – Calculation of Compression Factor Part 2 Calculation Using Molar-Composition Analysis (First Revision)

20. IS 16338 : 2019 Fibre Ropes – Coir Twine for Trailing Hop Vines – Specification (First Revision)

21. IS/IEC 60034-8 : 2014 Rotating Electrical Machines Part 8 Terminal Markings and Direction of Rotation (Third Revision)

22. IS/IEC 61508-1 : 2010 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 1 General Requirements (First Revision)

[Notification No. Ref: PUB/3/3/2019-20]


Bookmark

Related Updates



Alternate Text

Get updates on the go on RuleZbook Mobile App.